1-805-484-2992
Quotes - Engineering - SalesA1603T000
IPAC| Product | Capacity | Rating | Compressor |
|---|---|---|---|
| Air-Cooled Aftercooler | 670 SCFM | 200 PSIG / 400°F | 125 HP |
Note: Unit pictured is representative of the standard air-cooled aftercooler and may not exactly depict p/n A1603T000 as shown on this page.
Description
The A1603T000 is an IPAC A Series air-cooled compressed air aftercooler rated for 670 SCFM at a 250°F inlet and 100 PSIG, cooling to within 15°F of a 75°F ambient. It is the catalogued match for a 125 horsepower compressor, carries 2-1/2" NPT air connections, stands 62.2" high and weighs approximately 345 lb. The recommended separator is the IPAC S04H with a SAC120 automatic drain trap.
Product Overview
Part Number:
A1603T000
Series:
A Series Air-Cooled Aftercoolers
Brand:
IPAC
Type:
Air-Cooled Aftercooler
Configuration & Size
SCFM:
670
Dim A:
62.2"
Dim B:
27.3"
Dim C:
50.0"
Connection:
2-1/2" NPT
Weight:
345 lb
Fan HP:
3/4
Compressor HP:
125
Separator:
S04H
SCFM at 5 / 10 / 15 / 20°F approach:
277 / 402 / 670 / 720
Also Written As:
A16030BO, A1603000
Materials of Construction
- Tubes: Copper
- Fins: Aluminum (copper optional)
- Housing: Steel
- Motor: 230/460/3/60 TEFC
Rating
- Max Working Pressure: 200 PSIG (230 PSIG on HiROSS-built units)
- Max Inlet Temperature: 400°F
- Approach: 15°F above ambient
Alternate Part Numbers
The A1603T000 is also found on nameplates and in compressor parts lists as A16030BO, A1603000. These are the same unit; the differences are long-form option codes, HiROSS-era designations or reseller transcriptions. See the Legacy & Alternate Numbers page.
