1-805-484-2992

Quotes - Engineering - Sales

IPAC Part Number Index

Every catalogued IPAC model on one page

104 part numbers across eight ranges, including the superseded HiROSS cast separators. Each links to its own page with ratings, dimensions, materials and the recommended companion parts. Type a few characters of a number into the filter to narrow the list.

All IPAC Part Numbers

A Series Air-Cooled Aftercoolers — Fifteen catalogued sizes from 30 to 2,800 SCFM, matched to compressors from 5 to 700 horsepower

W 51 Series Water-Cooled Aftercoolers — Fifteen shell and tube models from 38 to 4,785 SCFM, all 51-1/8 inches long

W 59 Series Water-Cooled Aftercoolers — Nineteen close-approach models from 37 to 11,970 SCFM, all 59 inches long

Horizontal Centrifugal Separators — Sixteen current sizes from 127 to 25,000 SCFM, plus the three HiROSS-era cast units they replaced

Vertical Centrifugal Separators — Seven sizes from 900 to 5,800 SCFM with a side inlet and top outlet

SAC Automatic Drain Traps — Float-operated condensate traps in 1/2 and 1 inch sizes

STA Series Shell and Tube Oil Coolers — Seventeen sizes from a 3 inch shell 14 inches long to an 8 inch shell 72 inches long

WAC Series Closed-Circuit Water Coolers — Nine packaged models from 62,000 to 476,000 BTU/hr

What We Need to Quote

A selection comes together quickly once the duty is stated.

  • Compressor SCFM and pressure, or the heat load
  • Inlet temperature and the cooling water or ambient temperature
  • Required outlet temperature
  • Design pressure and any code stamp

Replacing an Existing Unit

Where a unit is being replaced, the nameplate does most of the work.

  • IPAC or HiROSS model number, exactly as stamped
  • National Board number where one is fitted
  • Connection sizes and orientation
Send Us the Nameplate

Quote Request Form:

Questions?

1-805-484-2992

Quotes - Engineering - Sales
Products
Applications
LINKS
CONTACT
Credit Card

© 2026.1 IPACheatexchangers.com | All rights reserved.