1-805-484-2992
Quotes - Engineering - SalesS13HAUH0
IPAC| Product | Capacity | Rating | Orientation |
|---|---|---|---|
| Centrifugal Separator | 14,000 SCFM | 200 PSIG | Horizontal |
Note: Unit pictured is representative of the standard centrifugal moisture separator and may not exactly depict p/n S13HAUH0 as shown on this page.
Description
The S13HAUH0 is an IPAC horizontal centrifugal moisture separator rated for 14,000 SCFM at 100 PSIG, with a 18" FLG inlet and 10" FLG outlet, 87-1/4" high and weighing approximately 2,000 lb. It removes 99 percent of entrained water down to 20 percent of rated flow and pairs with the IPAC SAC100 automatic drain trap.
Product Overview
Part Number:
S13HAUH0
Series:
Horizontal Centrifugal Separators
Brand:
IPAC
Type:
Centrifugal Moisture Separator
Configuration & Size
SCFM:
14,000
Height:
87-1/4"
Width:
44-1/2"
Dim C:
64-1/4"
Inlet:
18" FLG
Outlet:
10" FLG
Weight:
2,000 lb
Drain Trap:
SAC100
Also Written As:
S13H, S13HAOO
Materials of Construction
- Body: Fabricated carbon steel
- Internals: Fixed impeller, anti-re-entrainment baffle
- Option: Stainless steel
Rating
- Max Working Pressure: 200 PSIG (high pressure on request)
- Efficiency: 99% at 20-100% of rated flow
- Rated At: 100 PSIG
Alternate Part Numbers
The S13HAUH0 is also found on nameplates and in compressor parts lists as S13H, S13HAOO. These are the same unit; the differences are long-form option codes, HiROSS-era designations or reseller transcriptions. See the Legacy & Alternate Numbers page.
