1-805-484-2992
Quotes - Engineering - SalesS06HAUH0
IPAC| Product | Capacity | Rating | Orientation |
|---|---|---|---|
| Centrifugal Separator | 2,800 SCFM | 200 PSIG | Horizontal |
Note: Unit pictured is representative of the standard centrifugal moisture separator and may not exactly depict p/n S06HAUH0 as shown on this page.
Description
The S06HAUH0 is an IPAC horizontal centrifugal moisture separator rated for 2,800 SCFM at 100 PSIG, with a 5" FLG inlet and 5" FLG outlet, 38-3/4" high and weighing approximately 200 lb. It removes 99 percent of entrained water down to 20 percent of rated flow and pairs with the IPAC SAC120 automatic drain trap.
Product Overview
Part Number:
S06HAUH0
Series:
Horizontal Centrifugal Separators
Brand:
IPAC
Type:
Centrifugal Moisture Separator
Configuration & Size
SCFM:
2,800
Height:
38-3/4"
Width:
22"
Dim C:
28-3/4"
Inlet:
5" FLG
Outlet:
5" FLG
Weight:
200 lb
Drain Trap:
SAC120
Also Written As:
S06H, S06HAMH0, S06HAOO
Materials of Construction
- Body: Fabricated carbon steel
- Internals: Fixed impeller, anti-re-entrainment baffle
- Option: Stainless steel
Rating
- Max Working Pressure: 200 PSIG (high pressure on request)
- Efficiency: 99% at 20-100% of rated flow
- Rated At: 100 PSIG
Alternate Part Numbers
The S06HAUH0 is also found on nameplates and in compressor parts lists as S06H, S06HAMH0, S06HAOO. These are the same unit; the differences are long-form option codes, HiROSS-era designations or reseller transcriptions. See the Legacy & Alternate Numbers page.
