1-805-484-2992
Quotes - Engineering - SalesS03CB0H0
IPAC| Product | Capacity | Rating | Orientation |
|---|---|---|---|
| Centrifugal Separator | 550 SCFM | 230 PSIG | Horizontal |
Note: Unit pictured is representative of the standard centrifugal moisture separator and may not exactly depict p/n S03CB0H0 as shown on this page.
Description
The S03CB0H0 is an IPAC horizontal centrifugal moisture separator rated for 550 SCFM at 100 PSIG, with a 2" NPT inlet and 2" NPT outlet, 21-3/4" high and weighing approximately 12 lb. It removes 99 percent of entrained water down to 20 percent of rated flow and pairs with the IPAC SAC120 automatic drain trap.
Superseded. The S03CB0H0 is a HiROSS-era cast aluminum separator (Bulletin CS/0987, 1987). It is no longer built; the current replacement is the WS03, which carries a higher rated flow in the same connection size. Figures on this page are the original catalogue values for identifying the unit on a nameplate.
Product Overview
Part Number:
S03CB0H0
Series:
Horizontal Centrifugal Separators
Brand:
IPAC
Type:
Centrifugal Moisture Separator
Configuration & Size
SCFM:
550
Height:
21-3/4"
Width:
5-25/32"
Dim C:
20-3/32"
Inlet:
2" NPT
Outlet:
2" NPT
Weight:
12 lb
Drain Trap:
SAC120
Also Written As:
S03C, S03CB0
Materials of Construction
- Body: Cast aluminum, Quick-Loc closure
- Internals: Fixed impeller, anti-re-entrainment baffle
- Option: Stainless steel
Rating
- Max Working Pressure: 230 PSIG
- Efficiency: 99% at 20-100% of rated flow
- Rated At: 100 PSIG
Alternate Part Numbers
The S03CB0H0 is also found on nameplates and in compressor parts lists as S03C, S03CB0. These are the same unit; the differences are long-form option codes, HiROSS-era designations or reseller transcriptions. See the Legacy & Alternate Numbers page.
