1-805-484-2992
Quotes - Engineering - SalesW0110
IPAC| Product | Capacity | Rating | Series |
|---|---|---|---|
| Water-Cooled Aftercooler | 350 SCFM | 200 PSIG | 51 |
Note: Unit pictured is representative of the standard water-cooled aftercooler and may not exactly depict p/n W0110 as shown on this page.
Description
The W0110 is an IPAC 51 Series water-cooled shell and tube aftercooler rated for 350 SCFM of compressed air at 100 PSIG, with 6.3 GPM of 80°F cooling water at a 250°F inlet. It is 51-1/8 inches long, carries 3" FLG air connections and 3/4" NPT water connections, is rated 200 PSIG and weighs approximately 89 lb. The recommended companions are the IPAC S04H separator and the SAC120 automatic drain trap.
Product Overview
Part Number:
W0110
Series:
W 51 Series Water-Cooled Aftercoolers
Brand:
IPAC
Type:
Water-Cooled Aftercooler
Configuration & Size
SCFM:
350
GPM @250°F:
6.3
Air In/Out:
3" FLG
Water In/Out:
3/4" NPT
Weight:
89 lb
MAWP:
200 PSIG
Separator:
S04H
Drain:
SAC120
Also Written As:
W0110FA000, W0110FA, W110HFT
Materials of Construction
- Tubes: Copper (SS, admiralty, 90/10 CuNi optional)
- Shell: Carbon steel
- Bundle: Fixed (removable optional)
- Tube Type: Helical or plain
Rating
- Max Working Pressure: 200 PSIG
- Max Inlet Temperature: 400°F
- Approach: 15-20°F
- ASME Section VIII Div. 1 U-Stamp: Standard on this size
Alternate Part Numbers
The W0110 is also found on nameplates and in compressor parts lists as W0110FA000, W0110FA, W110HFT. These are the same unit; the differences are long-form option codes, HiROSS-era designations or reseller transcriptions. See the Legacy & Alternate Numbers page.
